Care & Maintenance
Designed to last. Simple care ensures lasting performance.
Quick Rules
Do
- Warm water + mild soap
- Microfibre cloth
- Dry after use
Don’t
- Abrasive cleaners
- Harsh chemicals
- Steam cleaning
Care according to finish
Electroplated, Powder Coated, and Protected Living
- Use a mixture of warm water and mild, pH-neutral liquid soap (e.g.,dishwashing liquid) for cleaning;
- Using a clean microfibre cloth, gently wipe the surface then rinse thoroughly with clean water, and dry with another microfiber cloth;
- Apply only light pressure and wipe in a consistent, single direction to prevent scratches;
- Use a non-abrasive polish like Mr Sheen™ occasionally to enhance protection against water spots;
- Regular care is needed as these are decorative finishes and requires meticulous maintenance.
Living / Natural
- Wipe dry consistently to prevent water staining;
- Alternatively, Renaissance Wax can we applied sparingly and lightly buffed off with a clean microfibre cloth to stabilise the finish;
- To achieve a shiner look on polished brass finishes, Brasso™ is recommended to be applied sparingly and light buff off using a clean microfibre cloth.
Avoid this
Following these cleaning instructions is essential to maintain the appearance and longevity of the products.
Do not use steam cleaners
As high temperatures can damage the tapware and its finish.
Avoid using cream-based cleaners
To prevent residue buildup and deterioration of the finish.
Store cleaning agents and chemicals away
As vapors can cause damage to the products or hose connections.
Installation with acetone based silicones
Acetone-based (acetic-cure) silicones must not be used due to the risk of corrosion and damage to tapware finishes.
Refrain from using cleaning or spray agents
That contain acidic, caustic, bleach, or alcohol substances to avoid corrosion and deterioration of the tapware and finishes.
Never use abrasive materials such as cleaning powders
Abrasive cloths, scoring pads, scrub sponges, or steel wool for cleaning, as these can scratch and damage the finish.
